|
|
|
|
Belly Pans |
 |
RF Belly Pan |
Fiberglass,
unpainted Mounting Hardware |
US$330.00 |
 |
GSG Belly Pan |
Fiberglass,
unpainted Mounting Hardware |
US$360.00 |
| Front Fenders |
 |
RF Front Fender |
Fiberglass, unpainted | US$280.00 |
 |
GSG Front Fender |
Fiberglass, unpainted | US$230.00 |
| Radiator Side Covers |
 |
GSG Radiator Side Covers |
Fiberglass
unpainted Black Surface |
US$225.00 |
| Frame & Side Covers |
 |
RF Tank / Frame Covers |
Fiberglass
unpainted, LED Turn Signals 100 mm / 4 inches more narrow as the original covers. |
US$535.00 |
 |
GSG Frame & Side Covers |
Fiberglass
unpainted, Black Surface Available without signals, openings covers with race meshing. Available with LED, light tinted glass, rear opening covers with race meshing. |
Without Turn
Signals US$470.00 With Turn Signals |
| Engine Covers |
 |
GSG Clutch Cover |
CNC Machined
Aluminum Clutch Cover with window |
US$1000.00 |
 |
GSG Engine Cover Left |
Engine Cover
Left with integrated Crash Protector CNC Machined Aluminum |
US$500.00 |
 |
GSG Clutch Insert |
Black
Plastic Colored aluminum screws US$15.00 |
US$115.00 |
 |
GSG Sprocket Cover |
CNC Machined
Aluminum Will not work on California models with EVAP canister instelled. |
US$250.00 |
 |
RF Starter Cover |
Stainless Steel | US$100.00 |
|
Cockpit Screen |
 |
GSG Windscreen "Speed Screen" Tinted |
Stainless
Steel Mounting Hardware. Mounting on Triple Tree. Good Wind protection. |
Smoke Tinted US$245.00 |
 |
GSG Windscreen "Speed Screen" Black |
Stainless
Steel Mounting Hardware. Mounting on Triple Tree. Good Wind protection. |
Black |
| Frame Sliders / Crash Protectors |
|
GSG Engine Protector Sliders
GSG Engine Protector Sliders GSG Engine Protector Sliders |
CNC machined
billet brackets, plastic Delrin protector with steel insert, black or
white,
|
Pictures,
pricing, information, click here
|
 |
GSG Push on Shock Absorption Caps |
Fits all GSG-Moto
/ Moko sliders with a central mounting hole which are made over the past 18 years. |
Set of three US$25.00 |
| Tail Lifter Kits |
|
|
Metisse Tail Lifter |
20 mm higher | US$135.00 |
| Lowering Kits |
|
|
Metisse Lowering Kits |
40 mm lower | US$175.00 |
|
Rear Sets & Peg Adapters |
 |
RF Rear Sets |
CNC Machined
aluminum Peg Position approx. 20 mm back |
US$560.00 |
 |
GSG Rear Sets |
CNC Machined
aluminum. Double ball bearings 10 times adjustable, Adjustable brake & shift Pivot CNC machined master cylinder |
US$1050.00 |
 |
GSG Peg Lowering Kit |
Rider:
22 mm, 30 mm or 50 mm lower Passenger: 22 mm, 30 mm or 50 mm lower Including Foot Pegs For the Rider: We and our supplier recommend the 22 or 30 mm kit. It is easier to adjust and still, gives good ground clearance. |
US$170.00
Front
US$170.00 Rear |
 |
GSG Passenger Peg Adapters |
Passenger
Peg Adapters Black Anodized 30 mm lower, 45 mm to the front |
US$85.00 |
| Oil Cooler Kits |
 |
GSG Oil Cooler Kit |
Oil Cooler
Kit Brackets included. Stainless braided oil lines with red/blue or black/black fittings |
Red/Blue
Fittings US$840.00 Black/Black Fittings |
|
Slip Ons |
 |
Bodis Slip On |
Kit
Includes: Bordis Slip On "Oval Q5" with Carbon Cover
(left-right-upper), license plate bracket with LED tail light, LED plate light, cat eye and all mounting hardware. 8.5 kg (approx. 16 pounds lighter) Our opinion: B & B belong together (B-King & Bordis) |
Stainless
Polished US$1950.00 Titanium |
|
Plate Bracket / Tail Light |
 |
RF LED Tail Light |
Tail
Piece with LED Tail Light Fiberglass unpainted Works with RF Plate Bracket |
US$215.00 |
 |
RF Plate Bracket |
CNC machined Mounts to original tail or RF Tail Piece. It is recommended to install Kellermann Micro1000 or Polo signals. |
US$150.00 |
 |
Kellermann Plate Bracket |
Complete Kit
includes: Black Anodized Plate / Turn Signal Bracket, LED Tail Light Kellermann Turn Signals Micro 1000 LED or Polo LED white Glass |
US$265.00 |
| Head-Light Kits |
 |
RF Headlight "High-Pressure" |
Headlight,
Fiberglass housing unpainted, Stainless screen. |
US$510.00 |
 |
GSG Dual Headlight |
Black
or Chrome Housing Fork Clamps, Turn Signal Brackets Low Beam H7/50W, High Beam H4/60W |
US$390.00 |
 |
GSG Square Headlight |
Chrome
Housing Fork Clamps, Turn Signal Brackets H4 |
US$390.00 |
 |
Dual Headlight Arizona |
Aluminum
Housing Black / Silver or Chrome Low H4 12V 55/60W & High Beam H7 55W Mounting Brackets Headlight diameter 90 mm, 235 mm wide, 115 mm high, 80 mm deep from mounting point, 115 mm total depth |
US$380.00 |
 |
Oval Headlight | Black
or Chrome Housing Blue or Clear Glass High / Fog Light 2x H3 55W |
US$180.00 |
 |
Headlight Fire |
Black or
Chrome Housing 1 x H3 Elipsoid Low Beam 1 x H3 100 mm High Beam LED Parking Light Ring 165 mm wide including bracket 230 mm high, 70 mm deep middle bracket of headlight |
US$260.00 |
| More Headlight Kits Click Here |
| Head-Light & Turn Signal Brackets |
 |
GSG Headlight Brackets 1 |
CNC
Machined With or without Turn Signal Bracket Short Arm 125 mm Long Arm 155 mm Fork Diameter 35, 36, 37, 38, 39, 40, 41, 43, 45, 46, 48, 50, 52, 56, 60 mm |
Short
US$180.00 Long US$190.00 Turn Signal Brackets US$10.00 |
 |
GSG Headlight Brackets 2 |
Installation of Turn Signals possible | Alu
Bracket/Stainless Clamps US$140.00 All Stainless
Polished |
 |
GSG Turn Signal Brackets |
CNC
Machined Alu nature or Black anodized Pair Fork Diameter 35, 36, 37, 38, 39, 40, 41, 43, 45, 46, 48, 50, 52, 56, 60 mm |
CNC
Machined US$100.00 Black |
 |
GSG Turn Signal Brackets CNC |
Necessary
if some headlight or fairings are mounted. 31-34, 35-38, 39-42, 43-46, 47-50, 51-54, 55-58 mm Can also be used as
Headlight or Fairing mount with extensions. |
31
mm - 42 mm 43
mm - 58 mm |
| Universal Fly Screens |
 |
Metisse Windscreen for Naked Bikes |
Dark Tinted
or Iridium Fly Screen for Round Headlights or Dual Headlights Mounting Hardware included |
Dark Tinted US$140.00 Iridium US$200.00 |
 |
Hesa Windscreen Dual Headlight |
260
mm Wide, 240 mm High Available in Smoke Gray, Blue, Yellow, Green, Clear, Red, Black, Purple, Brown Flat Black, please add US$10.00 |
US$200.00 |
| More Screens Click Here |
|
Belt Drive |
 |
RF Belt Drive |
The
inspiration came from the Compressor B-King. RF developed a belt drive to give you the compressor look and feeling. Easy to install within 10-20 minutes. Remove the right side engine plug, install the belt drive, install two more mounting screws, done. The belt drive turns even when your B-King idles. Belt drive comes complete assembled, belts, wheels etc. CNC machined billet aluminum. |
US$890.00 |
| Handle Bars & Accessories |
 |
RF Bar Clamp |
CNC Machined
Billet Aluminum
Replacement for original bar clamp |
US$190.00 |
 |
RF Brake & Clutch Cover |
CNC Machined
Billet Aluminum Set |
US$175.00 Set |
 |
|
6 times adjustable even
while riding Each Lever is only 60 grams light Race tested, Perfect design 6 colors for Lever and Pointer Short Lever: Approx. 50 mm shorter as original Long Lever: Approx. 20 mm shorter as original |
Complete
List & Pricing, Click Here |
 |
Grips GR 205 |
Available in Red, Silver, Blue, Gold, Black |
|
 |
GSG Fat Bar Clamps |
Clamps for
Fat Bars 28.5 mm clamping area |
Alu nature
US$190.00
Silver or Black Anodized |
 |
GSG Fat Bars |
Low Rise Bar:
31 3/4 inch wide, 2 inch high, 2 inch pull back Superbike Bar: 29 1/4 inch wide, 2 inch high, 3 1/2 pull back 28.5 mm clamping area / outside 22 mm Aluminum Handle Bars available in: |
Low Rise US$140.00 Superbike |
 |
GSG Handle Bars |
Aluminum
Handle Bars available in: Silver, Red, Blue, Black, Gold, Titanium Green only SB 22 |
Low Rise 7 LR US$75.00 Superbike 22 SB |
 |
Hagen Handle Bar |
Aluminum
Handle Bar Low Rise HAG 7 Drag Bar HAG 6 Black Only More Information Click Here |
Low Rise
HAG 7 Drag Bar HAG 6 US$75.00 |
 |
Bar Ends | Bar ends
for hollow aluminum handle bars Available in: Silver, Red, Blue, Purple, Black, Gold, Green, Titanium |
US$25.00
a set |
| Brake Reservoir |
 |
GSG Brake Reservoir Rear |
CNC machined
aluminum Alu nature, silver or black anodized Modification on bracket necessary |
Alu Nature US$150.00 Silver Anodized US$155.00 Black Anodized US$155.00 |
| Brake Lines & Rotors |
|
|
GSG Brake Rotor "Flame" Front |
Ultra
lightweight stainless steel rotor US$340.00 each |
 |
GSG Brake Rotor "Flame" Rear |
Ultra
lightweight stainless steel rotor US$200.00 |
 |
Spiegler Brake Lines |
Starts at
US$57.00 for rear brake line Starts at US$68.00 for clutch line Starts at US$110.00 for a 2 line front kit Starts at US$144.00 for a 3 line front kit Stainless braided lines: Come with silver fittings and clear covers. Fittings are available in: Gold, Chromed, Blue, Black, Purple, Red, Charcoal, Green Covers are available in different colors. More info about Spiegler |
| Front Fork Conversion |
 |
RF Front Fork Conversion |
X-Large
Triple Tree with aluminum fork covers, Headlight "High-Pressure", Front Axle, Brake Rotor Adapters, Front Fender Ready to Install |
US$2900.00 |
| Universal Accessories |
 |
Kellermann Turn Signal Polo LED White Glass |
New
Innovation! Latest top level technology integrated in the shapely metal body out of the home of Kellermann. In addition to our micro 1000 LED it has been felicitous to expand our product range to the micro 1000 LED white. Impressively is the clear brilliant glass, whereby open up brand-new design variations. Clear Lens, Amber LED Black, Chrome or Satin Chrome Only turn signal, no running light A must for every StreetFighter!! |
US$75.00 each signal |
 |
Kellermann Turn Signal Micro 1000 LED White Glass |
Innovation! Latest top level technology integrated in the shapely metal body out of the home of Kellermann. In addition to our micro 1000 LED it has been felicitous to expand our product range to the micro 1000 LED white. Impressively is the clear brilliant glass, whereby open up brand-new design variations. Clear Lens, Amber LED Black, Chrome or Satin Chrome Only turn signal, no running light A must for every StreetFighter!! |
US$75.00 each signal |
 |
Kellermann Turn Signal Micro 1000 LED Amber Glass |
ECE type -
approved as rear and front indicator. Latest LED - technology in the
design and size of the mature micro 1000 (halogen). In conjunction with
the LED – technology, the MOSFET controlled internal LONG LIFE
PROTECTION GUARD circuit arrange for an extreme high durability. The ideal
trait of radiation of the high-performance optic and the quick responding
behavior of the LED arrange for more reliability. Black, Chrome or Satin Chrome Only turn signal, no running light A must for every StreetFighter!! |
US$70.00 each signal |
 |
Kellermann Turn Signals Micro 1000 |
70 mm long, 17 mm
high, 6W Halogen Light Bulb Black, Chrome or Satin Chrome Smallest turn signal we have ever seen This turn signal is not bigger as your pinky finger Only turn signal, no running light |
US$35.00 each signal |
|
Kellermann |
The original
bar end signals made in Germany. Licensed
protected design
made of high quality materials in CNC-production A must for every StreetFighter!! |
Alu
Satin Honed US$80.00 Alu Black US$80.00 Alu Polished US$90.00 Alu Satin Chrome US$100.00  Brass Black US$100.00Brass High Gloss US$110.00Brass Satin Chrome US$110.00 Stainless Satin US$105.00 Stainless Polished US$110.00each signal |
|
Kellermann |
The original
bar end signals made in Germany. Licensed
protected design
made of high quality materials in CNC-production A must for every StreetFighter!! |
Alu Satin Honed
US$65.00 Alu Black US$65.00 Alu Polished US$70.00 Alu Satin Chrome US$75.00
Brass Black US$75.00
Brass High Gloss US$85.00
Brass Satin Chrome US$85.00
Stainless satin US$80.00
Stainless Polished US$85.00each signal |
 |
GSG Mirror 1 |
Real Mirror Glass, -25%, Convex Mirror Glass CNC Machined Aluminum Hand made in Germany Mirror turn able 360 degrees |
Alu Nature US$140.00 each Black or Silver Anodized |
 |
GSG Mirror 2 |
Real Mirror Glass, -25%, Convex Mirror Glass CNC Machined Aluminum Hand made in Germany Mirror turn able 360 degrees |
Alu Nature US$150.00 each Black or Silver
Anodized |
 |
GSG Mirror Extensions |
CNC Machined Aluminum | Alu
Nature US$40.00 Set Black or Silver Anodized US$45.00 Set |
 |
Mirror Extensions Naked |
Aluminum 55 mm ( 2.16 inches ) extensions Black or Polished, Comes in a pair For all handle bar mounted mirrors Right/Right or Right/Left M10x 1.25 threat |
Black US$55.00
Polished |
 |
Oberon Bar End Mirror StreetFighter Round |
Universal
fitting bar end mirrors. 58mm diameter flat glass. Collet fitting system. Aluminum components, black or silver anodized. 2 off 6mm grub screws secure mirror in any position. Sold as a kit. Available to fit internal handle bar diameters from 12mm to 22mm. |
1 x Mirror, 2 x
Bar ends US$90.00 2 x Mirrors, 2 x Bar ends |
| More Mirrors Click Here |
|
StreetFighter Apparel |
 Front |
StreetFighters
Inc. Long Sleeve Shirt |
Small, Medium,
Large, X-Large, XX-Large, XXX-Large
US$20.00 |
|
|
|
|
|
GSG B-King |
|
GSG B-King Before and After |
 |
GSG B-King |
 |
RF B-King |
|
|
RF B-King |
|
RF B-King |
|
|
Joe's B-King Bodis Exhaust |
|
Joe's B-King Bodis Exhaust |
 |
Alex's B-King RF Belly Pan GSG Engine Sliders |
 |
Jimmy's B-King Alien Fairing GSG Tank/Frame Covers with clear lenses GSG Radiator Side Covers GSG Front Fender GSG Passenger Peg Adapter GSG Frame & Engine Protector GSG Fork and Swing Arm Sliders |
 |
Jon's
B-King Oberon Bar Ends Mirrors 105 x 58 |
 |
Alex's B-King GSG Engine Sliders Urban Headlight |
 |
B-King GSG Speed Screen Black |
|
|
|
|
|
